Roofing Systems in Boise, Idaho

The Basics
Single Ply systems are a refreshing alternative to Modified Bitumen or Built – Up Asphalt Roofing and can be applied to virtually any type of building design. The liability risks with single ply systems are overwhelmingly less than the risks with a hot applied system. We offer various types of membrane: PVC, Hypalon, TPO & EPDM. Some manufacturers offer their membrane in a variety of colors, however white is the most popular and least expensive. Fastening options range from Mechanically Attached, Fully Adhered, or Ballasted. All systems offer warranties; choices of 5 or 10 year material warranty, and 10, 15 or 20 year total system warranty.

Metal roofs have become a popular design option; we at Pro Tech Roofing Inc have joined the industry and successfully installed many shapes, sizes, colors and textures. Among these are; metal shingles, standing seam, and snap-lock, just to name a few. Warranties are available.

Pro Tech Roofing, Inc. offers their own 2 year labor warranty with all new & replacement roof contracts.

Roofing Systems

  • EPDM (Ethylene Propylene Diene Terpolymer)
  • TPO (Thermoplastic Polyolefin)
  • PVC (Poly vinyl chloride)
  • Metal Roofing


Ethylene Propylene Diene Terpolymer based elastomeric homogenous roof coverings. EPDM membranes are produced by extrusion, calendaring and lamination. Seaming of EPDM membranes is accomplished only through the use of an adhesive bonding agent.
Read More


Thermoplastic Polyolefin is produced utilizing a calendaring process where two sheets of the membrane are put together on each side of a reinforcement sheet. These sheets are all run between to large rollers under pressure and heat creating one membrane. TPO has been used as a roofing product since 1992 but was used for many years previously as a waterproofing product in Europe.
Read More


Poly vinyl chloride is produced by extrusion, calendaring or spread coating. Seaming is accomplished with either a solvent bond or a hot air weld. PVC roofing has been used in roofing applications since the 1960′s.

Metal Roofs

We apply and install metal roofs from several manufacturers including:
  • Metals USA
  • Standing Seam

Roofing Problems - Common Causes for Roof Leaks

  • Void in seam
  • Old Caulking
  • Open skylight
  • Skylight sealant unattached
  • Open penetrations
  • Chemicals

Trouble Shooting

When damage is found there are several options to consider:
Read More

Maintenance Programs

A maintenance program can save you thousands of dollars! You will agree that the roof on your building is a Major Financial Investment, protecting everything and everyone inside for an extended period of time. However, roofs are exposed to severe and relentless forces, such as; the suns heat, U.V. rays, thermal shock, building movement, ponding water, and many miscellaneous abuses. Since the roof is not visible its condition is usually unknown until leaks develop and interior components become damaged and a safety hazard is created.
Read More

Warranty Information

You're Covered! Not just by a quality roof, but by the best warranty in the industry.

Each Manufacturer receives a NOTICE OF AWARD before the project begins; to verify all components meet the manufacturers specifications. Then when the project is complete the manufacturer will PHYSICALLY INSPECT the roof to confirm that the roofing has been installed correctly. Only then will a warranty be issued. (Note:this does not apply for Material only warranties)

Warranties are available for many different applications & specifications according to manufacturers standards.

Here is a sample Pro Tech Roofing Labor Warranty